Western Stuccolastic

Stuccolastic is a knife grade, polymer compound for patch and repair of hairline surface cracks up to ¼” in depth and width.  It may be applied to gypsum plasters, portland cement plasters and stucco and acrylic finishes.

Stuccolastic is packaged in 1 gallon pails.  Fill is by weight and each pail contains 12 lbs / 5.44 kg of material.

Stuccolastic provides a durable, flexible matrix when properly applied that most paints will adhere to.

Sands Blends:
Stuccolastic is available in a smooth and fine aggregated texture.

No mixing is required.  A small amount of water may be added to the pail if it has been opened and the material has thickened.


Stuccolastic Instructions











Allow a minimum of 72 hours for the Stuccolastic to dry before application of primers, paints or acrylic finishes.

Most paints and acrylic finishes will bond to Stuccolastic.  Coating manufactures have a wide variety of products.  It is recommended that any coating being applied in a small test area to check adhesion before proceeding with the application of the coating.

Western White Cap bonder or similar products are required in portland cement base coats or colored finishes if applied over Stuccolastic.

Do not add accelerator, air entrainment or other admixtures to Stuccolastic without written permission from an authorized manufacturer of Western Blended Products.

Do not apply when surface or ambient temperatures are at or below 400F / 4.40C or above 1000F / 340C. Do not apply to surfaces that are contaminated with bond breakers, oils or other matter that may affect the performance of the product. Do not apply Stuccolastic if conditions are expected to be above or below the specified temperature range within 24 hours of application. Do not add additional ingredients to Stuccolastic without specific written approval from an authorized manufacturer of Western Blended Products.

Stuccolastic shall be kept indoors or if stored outdoors, shall be adequately covered to keep dry and be stored off the ground.

Manufacturers or Western Blended Products (WBP) warrants its products to be of merchantable quality and suitable for the general purpose for which they were intended, when applied in accordance with WBP instructions.  Manufacturers of WBP do not warrant its products to be suitable for any purpose or use other than for which they were intended.  Liability under this warranty is limited to supplying new material without charge, or at manufacturers of WBP option, to a refund of the purchase price.  In the event of a claim under this warranty, written notice must be given to the originating plant of the WBP goods at the address shown hereon.  This limited warranty is issued and accepted in lieu of all other expressed warranties, and expressly excludes liability for consequential damages.  Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you.  This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

January 6, 2009

Warning: session_write_close() [function.session-write-close]: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in /home/bwestern/public_html/includes/functions/sessions.php on line 106